Instruction manual

f) Remove the tap from its seating by pressing the two

clamping tabs (fig. 31).

g) Dismount the tap by pushing the body (B1) downwards,

then slide the lever (R) out of its seating (fig. 32).

Wash all the individual parts carefully with hot water and

washing-up liquid, rinse it well and proceed with the re-

assembly.

h) Separate the tank from its cover, undoing the fasteners

(D1) by pulling them upwards as shown in fig. 33.

i) Wash the tank and its components carefully with water

and washing up liquid, rinse them well and then proceed

to reassemble them, making sure the sealing ring (E1)

is positioned properly between the cover itself and the

tank.

To guarantee the seal, the rounded part of the said sealing

ring (as shown in fig. 34) must be turned towards the

cover.

Fig. 31

Fig. 32

Fig. 33

Fig. 34