Instruction manual

15
j) Switch on the mixer components with the
button
and allow the sanitising solution to move around until it
changes colour. The change in colour indicates the
internal components have been completely sanitised.
k) Lower the tap lever to empty the tank of all the solution
(fig. 22).
l) Lift the unit and remove it from its seating (as shown for
the other tap) without removing the tap (U) completely
(fig. 23).
m) Mount the cap (T) already fitted with CIP system, then
turn on the water flow and leave it to rinse everything for
2 minutes. Then turn off the water (fig. 24).
n) Switch off the mixer components with the button.
o) Reposition the tap in its seating until it is fully inserted
and remove the discharge hose from the dispensing hole
(fig. 25).
Fig. 22
Fig. 23
Fig. 24
Fig. 25