Instruction manual

14
e) Lift the unit and remove it from its seating (as shown for
the other tap) without removing the tap (U) completely.
Connect a discharge hose (V) long enough to reach a
discharge point to the outlet tap (fig.18).
f) Turn on the water flow to rinse the tank carefully.
g) Reposition the tap in its seating, ensuring it is inserted
fully. Fill the tank with water, using the CIP system, until
the water level in the tank reaches the cover, then turn
off the water (fig. 19).
h) Remove the CIP (T) from the cover, turning
anticlockwise, then lift it off (fig. 20).
i) Pour the sanitising product (also included in the CIP kit)
into the tank, following the instructions given for its use
(fig. 21).
Fig. 18
Fig. 19
Fig. 20
Fig. 21