Installation manual

492166INS
GATE RESTRICTOR PLATE
CAUTION: Disconnect power to dispenser before installing, removing or
adjusting restrictor.
FIGURE 2. GATE RESTRICTOR PLATE
ADJUSTMENT
This plate may be adjusted as shown in Figure 2 to reduce or increase with large containers the dispensing rate
of ice, especially desirable when using glasses or other containers with small openings. Adjustment can be
made by sliding up or down with nuts loosened, to obtain the desired amount of restriction.
4 1/2
1
14 TYP
4 TYP
OPENING
OPENING
7/16
(6) PLCS
18 5/8
44 3/8
29 3/4
31 1/2
20 3/8
40 3/41 13/16
1 5/16
21 1/4
REMOVABLE
DRIP TRAY
OPENING (2) IN UNIT BASE FOR BEVERAGE
AND WATER MANIFOLD INLET LINES, HOPPER
DRAIN LINES (2), AND ELECTRICAL POWER
SUPPLY CORD.
TO FRONT OF DRIP
TRAY ON COUNTER
TOP
TO FRONT TOP
OF DRIP TRAY
23 1/16
–Z MODEL
FIGURE 3. MOUNTING TEMPLATE (ICE ONLY –B MODELS)