Specifications

30 Typical Applications
Fig. 43: Input configuration for a classic anti-bunching start-stop experiment
To see the desired start-stop histograms, activate the traces for the input channels (i.e. the stop
channels) used in the trace parameters. The parameters for the two-detector setup defined in
the input configuration are shown in Fig. 44. A result obtained from a Rhodamine 110 solu-
tion is shown in Fig. 45.
Fig. 44: Trace parameters for a start-stop experiment, detector channel 6 against the detector declared as ‘refer-
ence’ in the input configuration.
Fig. 45: Anti-bunching curve obtained with the settings shown above
With the setups shown in Fig. 42, middle or right, classic anti-bunching histograms together
with correlation curves are obtained. A main panel with a start-stop histogram and an FCS
curve is shown in Fig. 46.