Service manual

CHD22/CHD30 General Description
Page 2
The CHD22 is a 22 inch wide hotel/motel cubed ice dispenser. It is designed to use a
CorneliusCcM0322 or CCM522 cube ice machine as the source for ice.
TheCHD30* is a 30 inch wide version of the CHD22 and is designed to use Cornelius
CCM0330 through CCM0530 cubers as its source of ice. Note: 22 inch wide ice machines
are not for use on the 30 inch wide dispensers.
*Higher capacity cubers, CCM0630, CCM0830 and CCM1030 may also be used, but they
require 230-volt power.
Basic Operation:
Ice from the cuber falls into the insulated hopper, where it is stored until needed. When a
user pushes the dispense chute a rotating wheel scoops the ice up to the top front of the
hopper where there is an outlet to the ice chute. Ice is directed into the users container.
Flaked or nugget ice should not be used in these dispensers.
Do not double stack cubers on these dispensers.
Condensate drain pumps are not recommended for drainage.
This is not a waterglass style dispenser.
Basic Specifications:
Basic models dispense ice when their chute is pushed and will continue to dispense ice until
the chute is released or the bin is emptied. Coin/Token models require a coin or token first.
Tokens are available from Cornelius, the part number for 500 tokens is 620204708. Water
Dispenser models are basic models with a factory installed separate water dispenser.
Model Dimensions Electrical Model Description Bin Storage
W x H x D Capacity ARI
With 6” Legs
CHD22P1 22 x 53 x 33½ 115/60/1 Basic 22” Model 60 Hz. 120 Lbs.
CHD22P5 22 x 53 x 33½ 230/50/1 Basic 22” Model 50 Hz. 120 Lbs.
Note: The factory installed Water Dispenser and Coin /Token features are not available on the
22-inch wide Basic Push Button dispenser and are not available as a field installed kits.
CHD30P1 30 x 53 x33½ 115/60/1 Basic 30” Model 60 Hz 180 Lbs.
CHD30C1 30 x 53 x33½ 115/60/1 Coin/Token 180 Lbs.
CHD30P5 30 x 53 x33½ 230/50/1 Basic 30” Model 50 Hz. 180 Lbs.
Note: The factory installed Water Dispenser is not available on the 30-inch wide Basic Push
Button dispenser and is not available as a field installed kit. The Coin/Token model is not
available with a Water Filler and is not available as a field installed Water Filler Kit.
Bin Thermostats
Bin Thermostats are not required in CCM series cubers on CHD22 or CHD30 Series
Dispensers.