Service manual

Lipton Brewed Iced Tea Training, Installation, & Service Manual
630460171 - 36 May 7, 2002
Annual Pump Tubing Replacement Procedure
The pump tubing must be replaced annually. A replacement pump tubing kit, part #
631500149, is available. The kit consists of one pre-cut length of pump tubing, two
hose clamps, and instructions.
FIGURE 6 TEA EXTRACT PUMP
REPLACING PUMP TUBING
Replace pump tubing as follows:
1. Remove pump/motor assembly from the metal pump mounting bracket.
2. Remove the hose clamps from the pump tube connections. Remove the
extract delivery tubes from the hose ends.
3. Loosen and remove the four thumb screws from the pump body.
4. Remove the bottom pump body half only
to reveal the pump tube and
rollers.