Unit installation

3
1
2
0
2
2
0
0
0
1
7
15. Connect soft drink tanks into the syrup systems.
16. Dispense from the dispensing station dispensing valves until product is dispensed.
LEAK CHECK AND INSULATING COOLING UNIT OUTLET LINES
1. Check all CO
2
, plain and carbonated water, and syrup connections for leaks and repair if evident.
2. Make sure the Cooling Unit outlet lines connections to the insulated python lines are well insulated.
3. Install the Cooling Unit top cover and secure with two screws.
DISPENSING STATION ADJUSTMENTS
ADJUSTING WATER FLOW RATE
Refer to Installation Instructions provided with the Dispensing Station for dispensing valve water flow rate
adjustment instructions.
ADJUSTING WATER-TO-SYRUP ‘ ‘RATIO’ ’ OF DISPENSED PRODUCT
Adjust the Dispensing Station dispensing valves for Water-to-Syrup ‘‘Ratio’’ of the dispensed product as
instructed in Dispensing Station Installation Instructions.
INSTALLING LINE IDENTIFICATION LABEL
Install LABEL, LINE IDENTIFICATION (item 4) on the Cooling Unit, then record syrup flavors in the proper
spaces.