FCC Warning This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
FCC ID : 2ARNVCB02 RF EXPOSURE EVALUATION METHOD SAR Test Exclusion Thresholds for 100 MHz – 6 GHz and ≤ 50 mm Approximate SAR Test Exclusion Power Thresholds at Selected Frequencies and Test Separation Distances are illustrated in the following Table. The 1-g and 10-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances ≤ 50 mm are determined by: [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)] · [√f(GHz)] ≤ 3.0 for 1-g SAR and ≤ 7.
FCC ID : 2ARNVCB02 Maximum measured transmitter power. BT4.2（LE） The Worst Case Mode Detector GFSK 2402-2480MHz PEAK -5.5±1dBm Remark: The worst case gain of the antenna is 0dBi. 0dBi logarithmic terms convert to numeric result is nearly 1.0 Protocol GFSK Output Channel Power Frequency to (GHz) Antenna (dBm) 2.48 -4.66 Tune Up Power (dBm) Tune Up Power (mW) Result Limit -4.5 0.35 0.11 3 Threshold at which no SAR required is 0.11≤ 3.0 for 1-g SAR, Separation distance is 5mm.
