Owner`s manual

13
• Now the following screen should be displayed. This is the
screen where your network password is selected. Choose a
password between 4 and 24 characters, the password is case
sensitive so remember exactly how it was typed as it will be
needed for the next device being set up. Type your password
in the 'Network Password' box and click 'Next'. If you don’t
want to use encryption, uncheck box “Encrypt frames”.
• Click 'Next' again to program the Corinex Powernet USB
Adapter with the new encryption key. This will take a few
seconds. The next screen will look similar to the following
screen. The white box will list the MAC addresses of all other
installed powerline devices on the network that are
programmed with your chosen network password. If no
other devices have been programmed, the list will be empty.