User guide

Installation Guide

Corinex AV200 Powerline Ethernet Adapter

2.6 Installing the AV200 Powerline Adapter

To connect the Corinex AV200 Powerline Adapter to your computer, follow the steps

listed below.

1. Connect the supplied Ethernet cable to the LAN port on the adapter and to

an Ethernet port on your computer.

2. Connect the power cable to the Powerline port on the adapter and the other

end into any AC electrical outlet.

Note: Please use a straight-forward Ethernet cable for connection of the

AV200 Powerline Adapter to your computer. If you are connecting the AV200

Powerline Adapter to a modem or switch, please use a crossover cable.

2.7 Testing the Setup

To verify that your equipment is connected and working correctly, use the standard

Ping utility. In Windows, click on menu Start -> Run, then write the command

ping IPADDRESS -t, where IPADDRESS is the IP address of the computer to

which the AV200 Powerline Adapter is connected, e.g. ping 192.168.4.1 -t (this

process can be interrupted by pressing CTRL+C).

1. Ping the IP address of the computer to which the AV200 Powerline Adapter

is connected. If this fails, there is a problem with the Ethernet network card

or with the TCP/IP protocol.

2. Repeat the same process with the other computers on your AV200 Powerline

network.

3. If all the computers can ping themselves, try pinging another computer on

your AV200 Powerline network. If this fails, then there is a problem with the

connection across your AV200 Powerline network or with the configuration

of the AV200 Powerline Adapters. Check the connection to the outlet, or

try a different outlet. Verify the configuration of the AV200 Powerline

Adapters, especially the network number, as only adapters in the same

network can see each other. Please see chapter 3 for details on

configuration.

If you experience any problems with your setup, try unplugging the AV200 Powerline

Adapter and restarting the computer, as this sometimes fixes the problem. If the

problem persists, please refer to the troubleshooting guide at the end of this

manual.