Technical data

Web Configuration

Corinex AV200 CableLAN Adapter

Once the trigger condition is entered, the classification rules must be specified.

Only the fields that are actually changed will take effect. The rest will be ignored.

IP packets have a one-byte field at offset 27 that indicates the Protocol Type. UDP

protocol is pattern 0x11. Because the field to inspect is only one byte, the bitmask is

also one byte. The values are entered in the first available rule (1) as Class Pattern

1 and Class Priority 1.

The rest of the traffic (FTP, Web browsing, etc.) will receive default priority 2. On

the other side of the network, the modem connected to the computer will also

classify outgoing data traffic with default priority 2 because no rule has been pro

grammed.

Note: While the offset value is assumed to be decimal, the patterns and the

bitmasks are in hexadecimal format by default.

3.4 Firmware Update Page

This page appears when a firmware update is requested from the Change

Configuration page, and it shows the status of the current firmware update. The

Firmware Update page is reloaded automatically every 30 seconds. When the

status line shows Ready: finished correctly, the adapter can be restarted, and the

new firmware will be loaded.

If the update process fails, an error message will be shown. In this situation, the

adapter can be reset without any risk, but the old firmware will still be present on

the adapter.