Technical data

17
Web Configuration
Corinex AV200 CableLAN Adapter
3.3.8 Security Configuration
The web application lets you change the configuration password by typing a new
password (twice, for verification). If both fields are left empty, the configuration
password will be disabled and the message No password installed will be shown
in the security configuration form. This means the web configuration authentication
(login to these web pages) will be disabled too. The authentication can be enabled
again by simply entering a configuration password at any time.
The Network Identifier can also be set as a hexadecimal (xxxxxx) value. It should
have the same value on each adapter within a single network. This number (be-
tween 1 and 220-1) will be used to encrypt your CableLAN transmissions. Entering
000000 (six zeroes) disables the encryption.
Adapters with different Network Identifiers are not able to communicate with
each other. The purpose of this basic encryption scheme is not to offer tight security
restrictions; but is designed as a simple way of differentiating between in-home net
-
works, a way to keep your computers separated into different networks, or groups,
according to your needs.
In order to initiate a factory reset, a specific password is required. If the password is
valid, the configuration will be set back to factory defaults.