Technical data

16
Web Configuration
Corinex AV200 CableLAN Adapter
The settings for an Access Point (AP) include a list of the allowed End Point MAC
addresses, the other adapters that are allowed to connect to the Access Point.
The list can be saved directly to the adapter (Save in NVRAM). You can remove
MAC addresses by checking their Remove checkboxes and clicking Ok. A new
MAC address can be added to the list by entering it, in hexadecimal format in the
appropriate field and clicking Ok.
For the configuration to become effective, click Ok and wait for the page to refresh.
The modem does not need to be rebooted.
3.3.7 Multicast Configuration
In order to optimize multicast traffic (video streams, etc.) between the AV200
powerline devices, the user can specify which devices will receive the traffic. All
others will not be able to listen to the multicast communication therefore the
bandwidth originally used for transmission will be preserved.
This form shows the list of multicast bindings, where multicast IP addresses are tied
to a unicast MAC address. This list can be saved to the adapter (Save in NVRAM).
Moreover, you can remove bindings by checking their Remove checkboxes and
clicking Ok. A new binding can be added to the list by entering the multicast IP
address, in decimal (ddd.ddd.ddd.ddd) format, and the unicast MAC address, in
hexadecimal (XXXXXXXXXXXX) format, in the suitable fields and clicking Ok.