Technical data

14
Web Configuration
Corinex AV200 CableLAN Adapter
2. Place the image file in the directory specified in Current Directory or change
it to point to the place where the image is stored.
3. Open the Web browser and enter the IP of the modem that to be upgraded.
4. When the page comes up, click on Change configuration.
5. In the Firmware Update window, select TFTP and enter the IP of the TFTP
server and the name of the image file, as shown in the next picture.
6. Click Ok to start the process. Progress information is shown on the Web
page every 30 seconds.
7. The modem will first download the file and then calculate the CRC.
8. If the CRC is correct, the Hardware Reset button will be highlighted. The
modem must be reset for the new firmware to start running.
3.3.5 Network Configuration
The modem in your Corinex AV200 CableLAN Adapter can be configured to use
DHCP or a fixed IP (IP Configuration).
The following settings are used by the fixed IP configuration. In order to use the
adapter in conjunction with other equipment, on a P2P or an In-Home AV network,
it is necessary to define a valid and unique IP address on the network, as well as
a proper subnet mask and gateway address. These options will be stored in the
modem and activated at each reboot or restart.