User guide

Corinex ADSL+ Gateway G Configuration

Corinex ADSL2+ Wireless Gateway G

In the table below you can see the description of this page.

Field Description

Enable RIP Enable/Disable RIP

Protocol The following three RIP versions are available:

•RIP v1

•RIP v2

•RIP v1 compatible.

Enable Password The 16 character long plain text password.

Password Netmask of the source IP on your LAN side.

Direction Normally when RIP is enabled on a router it dynami-

cally learns routes on all it’s configured interfaces. This

parameter allows the user to select the interfaces on which

RIP is expected to learn and distribute routing informa-

tion. This feature allows the user to control how and which

routes get distributed through the network e.g. prevent

routes to the private LAN networks from being sent over

to the WAN side router. The following four direction op-

tions are available:

• Both: Receive updates on the interface and also send it’s

routing table to other routers connected to that

interface.

• In: Receive routing updates from other routers connect-

ed to that interface but NOT send routing updates on

that interface.

• Out: Send routing updates but not receive updates on

this interface from the other routers connected to that

interface

• None: Ignores this interface and not send or receive

routing updates through this interface.