User guide

Installation Overview

Corinex ADSL2+ Wireless Gateway G

6. Click OK again to close.

7. Make sure that the ADSL2+ Wireless Gateway G is powered on. Restart your

system.

8. Follow the above steps 1-7 for all computers connected to the gateway through

the Ethernet interface.

3.2.2 Installing the USB Device Driver

Note: Please do not connect the Corinex ADSL2+ Wireless Gateway G to your

computer before step #2.

1. Insert the Corinex ADSL2+ Wireless Gateway G CD into the CD-ROM drive of

your computer. If the installation wizard doesn’t start automatically, please

navigate to the main folder of the installation CD (with Windows Explorer or

any other file browser program) and run the program named autorun.exe.

Click Install USB Drivers. The wizard for the USB driver installation will start.

Please wait until the installation of the drivers is finished and then click Close to

finish the installation wizard.

Click Install USB Drivers. The wizard for the USB driver installation will start.

Please wait until the installation of the drivers is finished and then click Close to

finish the installation wizard.