Energy Guide

CORIAN
®
SOLID
SURFACE
According to ISO 14025
Product Characteristics
Corian
®
conforms to the following technical specifications for solid surface:
– NSF/ANSI 51 – Food equipment materials
– ISO 19712-1 Classification and specification of solid surfaces
– ISO 19712-2 Classification and specification of sheets
– CSA B45.5-17/IAPMO Z124-2017 Plastic plumbing fixtures
– ISFA-2-01 (2013) Classification and standards for solid surfacing material
– ISFA-2-02 (2013) Fabrication standards for solid surfacing material
– EN 13310 Kitchen sinks. Functional requirements and test methods
– EN 14688 Sanitary appliances. Wash basins. Functional requirements and test methods
– BS EN 14516 Baths for domestic purposes
– BS EN 14527 Shower trays for domestic purposes
Technical details and product characteristics are detailed in Table 2 and Table 3. Additional information on Corian
®
performance properties can be found online.
Table 2: Solid surface characteristics
Characteristic Nominal Value Unit
Primary material thickness 6 – 19 (0.25 – 0.75) mm (inch)
Sheet length 183 – 366 (72 – 144) cm (inch)
Sheet width 76 – 93 (30 – 36.6) cm (inch)
Primary material weight 10,700 – 32,100 (2.2 – 6.6) g/m
2
(lbs./ft.
2
)
Underlayment included None –
Underlayment type None –
VOC emissions test method
UL 2818 - 2013 Standard for Chemical Emissions for
Building Materials, Finishes and Furnishings
ANSI/BIFMA M7.1-2011(R2016) and determined to
comply with ANSI/BIFMA X7.1-2011(R2016) and
ANSI/BIFMA e3-2014e Credit 7.6.1, 7.6.2, and 7.6.3 in
an Open Plan Office Environment. Products also
determined compliant in accordance with California
Department of Public Health (CDPH) Standard Method
V1.1-2010 in the office environment.
Other characteristics GREENGUARD and GREENGUARD GOLD certification