Energy Guide

CORIAN
®
SOLID
SURFACE
According to ISO 14025
Table 3: Additional solid surface characteristics
Characteristic Nominal Value
Test Method
Bulk density 1.7 g/cm
3
ASTM D792
Linear thermal expansion
3.9 × 10
-5
m/m °C
(2.2 × 10
-5
in. / in. °F)
ASTM E228
Hardness, Rockwell “M” scale > 85 ASTM D785
Hardness, Barcol impressor 56 ISO 19712-2 (ASTM D2583)
Flexural strength 10,000 psi
ASTM D790
Flexural modulus 1.2 × 10
6
psi
Tensile modulus 1.5 × 10
6
psi
ASTM D638
Tensile strength 6,000 psi
Tensile elongation 0.4% min
Compressive strength 16,000 psi ASTM C365
Ball impact resistance: Sheets
No fracture – ½ lb. ball – 6mm sheet
36 in. (no failure at height)
NEMA LD 3-3.8
Ball impact resistance: Sheets
No fracture – ½ lb. ball – 12mm sheet
144 in. (no failure at height)
Consistency of color Pass ISFA SST 2.1-00
Flatness of sheets Pass ISFA SST 4.1-00
Visual defects Pass ISFA SST 5.1-00
Wear and cleanability Pass
CSA B45.5-17/IAPMO Z124-
2017
Stain resistance Pass
Light resistance Pass
ISO 19712-2
Stain / chemical resistance test Pass
Resistance to cigarette burns Pass
Resistance to dry heat Pass
Resistance to wet heat Pass
Hot/cold cycle water-resistance test Pass
Load test Pass
Dimensional stability Pass ISO 4568-2