Compatibility Chart
CORIAN
®
SOLID SURFACE
FABRICATION/INSTALLATION FUNDAMENTALS
NA/ENGLISH
Corian® Solid Surface Fabrication/Installation Fundamentals 2 /2
CORIAN
®
SOLID SURFACE
SITE PREPARATION AND TEMPLATING
K-25287-NA 09/18
PLEASE VISIT OUR WEB SITE: WWW.CORIAN.COM OR CONTACT YOUR CORIAN
®
REPRESENTATIVE
FOR MORE INFORMATION ABOUT CORIAN
®
SOLID SURFACE
is information is based on technical data that E. I. du Pont de Nemours and Company and its affiliates (“DuPont”) believe to be reliable, and is intended for use by persons having technical skill and at their own discretion and
risk. DuPont cannot and does not warrant that this information is absolutely current or accurate, although every effort is made to ensure that it is kept as current and accurate as possible. Because conditions of use are outside
DuPont’s control, DuPont makes no representations or warranties, express or implied, with respect to the information, or any part thereof, including any warranties of title, non-infringement of copyright or patent rights of others,
merchantability, or fitness or suitability for any purpose and assumes no liability or responsibility for the accuracy, completeness, or usefulness of any information. is information should not be relied upon to create specifications,
designs, or installation guidelines. e persons responsible for the use and handling of the product are responsible for ensuring the design, fabrication, or installation methods and process present no health or safety hazards. Do not
attempt to perform specification, design, fabrication, or installation work without proper training or without the proper personal protection equipment. Nothing herein is to be taken as a license to operate under or a recommendation
to infringe any patents. DuPont shall have no liability for the use of or results obtained from such information, whether or not based on DuPont’s negligence. DuPont shall not be liable for (i) any damages, including claims relating
to the specification, design, fabrication, installation, or combination of this product with any other product(s), and (ii) special, direct, indirect or consequential damages. DuPont reserves the right to make changes to this information
and to this disclaimer. DuPont encourages you to review this information and this disclaimer periodically for any updates or changes. Your continued access or use of this information shall be deemed your acceptance of this disclaimer
and any changes and the reasonableness of these standards for notice of changes..
Copyright© 2018 E. I. du Pont de Nemours and Company. e Corian® Solid Surface Logo and Corian® are trademarks of E. I. du Pont de Nemours and Company or its affiliates. All rights reserved.
3. Mark all important information on the template, such as points of
support, centerline of sink plumbing, electrical, ducting, centerline
of cutouts, seam location(s), finished ideas, type and location of
backsplash, and any other details that will ensure fabrication
accuracy.
e figure below illustrates a well-constructed
5
/32" (4 mm) plywood template.
Figure B-1
HELPFUL HINTS
Use corner straps to maintain squareness of the frame.
Make sure that the template matches the shape of the room, in terms of both
squares and contours in walls and corners.
C. Digital Templates
ere are several commercially available digital template systems. Each
one has its own features and benefits. Careful investigation should be
done before making a purchase.