User's Manual

68 Using Your Projector
In order to use your projector wirelessly, you need to complete the steps below:
1
Install the wireless antenna. See "Installing the Antenna" on page 12.
2
Enable wireless connection on the projector. See "WIRELESS / NETWORK"
on page 55.
NOTE: When you start wireless, please wait about 50 seconds reboot the
Wireless / Network.
3
On INPUT SELECT menu, select Multiple Display and then select Wireless
display on sub-menu. See "INPUT SELECT" on page 45. The
Wireless Guide
Screen
shown below appears.
4
Take note of the
LOGIN CODE
,
NETWORK NAME
(
SSID)
, and
IP
ADDRESS
. You will need these information to login later.
5
Connect your computer to the
S300wi
network.