User's Manual
Table Of Contents
- Owner’s Manual
- Contents
- 1 Your Dell Projector
- 2 Connecting Your Projector
- 3 Using Your Projector
- 4 Troubleshooting Your Projector
- 5 Specifications
- 6 Contacting Dell
- 7 Appendix: Regulatory Notices
- 8 Glossary
- 9 Index
- Your Dell Projector
- Connecting Your Projector
- Connecting to a Computer
- Connecting a Computer with an M1 to D-sub/USB Cable
- Connecting a Computer with a D-sub to D-sub Cable
- Connecting to a DVD Player
- Connecting a DVD Player with an M1 to HDTV Cable
- Connecting a DVD Player with a D-sub to YPbPr Cable
- Connecting a DVD Player with a RCA to RCA Cable
- Connecting a DVD Player with an S-video Cable
- Connecting a DVD Player with a Composite Cable
- Connecting a DVD Player with a BNC to VGA cable
- Professional Installation Options: Installation for Driving Automatic Screen
- Installation for wired RS232 remote control: Connection with PC
- Connection with Commercial RS232 Control Box:
- Connecting to a Computer
- Using Your Projector
- Troubleshooting Your Projector
- Specifications
- Contacting Dell
- Appendix: Regulatory Notices
- Glossary
- Index
Using Your Projector 39
To manage the projector from Web Management
Configuring the Network Setting
If the projector is connected to a network, you can access the projector using
a web browser by configuring the network setting (TCP/IP). When using the
network function, the IP address should be unique. There are two ways for
configuring the network setting.
1
Using the IP Address function on
Network Setting
menu; See OSD
section page 34, or,
2
Use the AP software to set up network setting for the projector.
Accessing the Web Management
Use Internet Explorer 5.0 and above or Netscape Navigator 7.0 and above
and enter the IP address. You can now access
Web Management
and manage
the projector from a remote location.