User Manual

7
5.2 Loading
Connect the load according to the placement method described below, as shown in the
figure below:
Correct loading method
Incorrect loading method
When connecting the objective lens, pay attention that the quality of the objective lens
does not exceed the maximum allowable load of XD730.400, and the load is not too long,
otherwise it is easy to cause oscillation and damage XD730.400.
5.3 Operating
Please confirm the following information before starting the power supply:
The environment meets requirements of XD730.400 working environment.
The fixing screws must be tightened.
The above information is determined to perform controller related operations:
1. Please carefully read piezo controller user manual before operating, then start the
controller.
2. Set the piezo controller to zero.