User Manual

3
In order to prevent damage to the product caused by improper operation, please
pay attention to following points when using:
Linear piezo nanopositioning stage is used as much as possible in dust-free, oil-free,
lubricant-free environments;
Since the product adopts flexible structure design, it is recommended that the load
not exceed the bearing capacity of the product. Pay attention to the torque when
loading. Do not twist or twist the load surface to avoid damage to the structure;
Do not disassemble the product to avoid product damage;
Avoid stretching and bending the cable interface to prevent damage to the cable;
Please use the dedicated cable provided by us to connect the linear piezo
nanopositioning stage and piezo controller;
Please do not use cable extension wire, if need longer cable, please contact us.
Temperature changed and pressure will charge the piezo product. It will remain
charged for a period of time disconnected from the controller, so the operator
should pay attention when using it:
Do not disassemble piezo stage;
Discharge piezo stage before installation, it could be achieved by connecting to
the controller;
Do not pull out the controller during operation;
Before using, please check whether the connecting wire of the product is in good
condition, whether the product and the controller are effectively protected from
grounding, in case of danger, please strictly regulate the operation during operation,
do not touch it (up to 120V voltage) after power on.
2. Safety Guide
Linear piezo nanopositioning stage is designed with advanced technology and safety
standards,
for
safety and proper use of the product, please pay attention to following
points when using: