User Manual

S22 Piezo Tip/tilt Platform User Manual

Note:

Please do not remove the grounding protection during operation. If it needs to be

temporarily removed, reconnect the grounding protection before starting again.

Drive voltage should not exceed 150V;

If abnormal noise or oscillation occurs during operating, immediately turn off the

power check parameter setting.

6.1 Transportation

Piezo stage is packed in carton. The transportation is carried out under the condition of

packaging. This product can be transported by various means of transportation under

normal conditions. During transportation, it should avoid direct rain and snow, avoid

contact with corrosive substances, and avoid strong collision, try to avoid improper

behavior such as squeezing, irregular placement.

6.2 Unpacking inspection

Please check below information:

Before opening the package, please carefully check the packaging for damage,

bruising, wetting, moisture, deformation, etc.;

Please check the parts on a case-by-case basis based on the supply contract and the

packing list;

Whether there is obvious damage on the surface of the product;

Whether the product identification is clear and complete;

Whether the connector is loose, the connection line is broken or not, etc.;

If any of the above occurs, please make a detailed record and take a photo, and please

Precautions:

Please handle gently when unpacking to avoid permanent damage to the stage

6. Transportation and inspection