User Manual

9
2. Choose the mounting bracket or install the piezo tip/tilt platform through the transfer
method. It is recommended to use M3 screws. Clean the mounting bracket before
installation, or you can contact us to select the appropriate transfer method for installation.
3. S22 is fixed on the installation plane or fixed on the installation plane through related
tooling. Please note that if the related rotating mirror products need to be placed in other
places (such as side, oblique, etc.), please contact us to consult.
4. Connect the S22 cable to the controller.
Be careful not to scratch the lens during the pasting and installation,
Don't drop the adhesive into the gap of rotation axis, so as not to affect the accuracy,
Please select appropriate screws to fix the connection to prevent loose installation and
falling off of piezo tip/tilt plaform, which may cause permanent damage. Pay attention to
the standard operation during the entire installation and operation process, please carry
out relevant operations under the guidance of professionals.
Installation Precautions:
Transfer plate
Figure6. Transfer mode