User Manual

13
8. Connector
7.2 Daily maintenance
If the piezo stage is not used for a long time, please store it in an room environment with
no dust, good ventilation, clean and non-corrosive substances.
Please do not loosen the screws on the stage structure, avoiding to affect the accuracy of
the stage.
Daily cleaning:
Please disconnect the piezo stage to controller, then clean the surface of it.
When cleaning, first wipe a small amount of detergent with a towel and gently wipe the
surface of the piezo stage, then wash it with alcohol. Please do not use ultrasonic waves
for cleaning.
When cleaning the surface, try not to pick up the product. If it is necessary to pick up,
please place a sponge under the piezo stage for protection, the piezo stage should not be
too high from the sponge to prevent the piezo stage from falling off.
FIG.9 1-contact LEMO
8.1 Driving and Sensor cable
Driving cable interface is 1-contact LEMO, model number is LEMO ERA.00.250.CTL, as
shown below: