User Manual

P92.X60 Fast Tool Positioning Stage User Manual
8
For the protection of the product, we do not recommend that the load is too long, the
wrong mounting way is shown below.
It is forbidden to mount the load on one side of the moving platform, which will cause
serious damage to the product, as shown below.
Excessive length of screws selected in the fastening and connecting process will lead to
failure in installation or leakage of bolts, which will expose the product and scratch the
product, affecting the motion accuracy of the product. Short bolts will lead to insufficient
compactness of the connection and easy looseness, which will damage the internal
structure of the product during operation.
FIG.5Try not to let the position of the center of gravity far exceed the active platform
FIG.6 Do not mount long loads on one side of the platform