User Manual

7
After the above information is confirmed, relevant controller operations can be carried out:
1.Please read the user manual of the controller carefully before operation, and then start
the controller.
2.Set the controller' output voltage to zero first.
3.Check no abnormal phenomenon, then input voltage value (via keyboard or analog
control) according to specified input voltage range.
4.Operating normally within the rated voltage range of piezoelectric ceramics (0~120V,
maximum 150V).
5.After use, please carry out voltage reset operation.
Please take light steps when P92.X25 in operation, do not knock the product, so as not to
affect the use of the product or even damage the product.
In order to achieve better motion precision of P92.X25, it is recommended to use our
company's supporting controller. Please refer to the user manual of the controller for the
specific operation to ensure correct operation before relevant operation.
Notice:
The driving voltage shall not exceed the voltage(150V) range of P92.X25.
If any abnormal noise or oscillation occurs during use, turn off the power
immediately and check the parameter setting.
6.1 Transportation
Piezo stage is packed in carton. The transportation is carried out under the condition of
packaging. This product can be transported by various means of transportation under
normal conditions. During transportation, it should avoid direct rain and snow, avoid
contact with corrosive substances, and avoid strong collision, try to avoid improper
behavior such as squeezing, irregular placement.
6. Transportation and inspection