User Manual

P92.X25 Fast Tool Positioning Stage User Manual

6.2 Unpacking inspection

Please check below information:

Before opening the package, please carefully check the packaging for damage,

bruising, wetting, moisture, deformation, etc.;

Please check the parts on a case-by-case basis based on the supply contract and

the packing list;

Whether there is obvious damage on the surface of the product;

Whether the product identification is clear and complete;

Whether the connector is loose, the connection line is broken or not, etc.;

If any of the above occurs, please make a detailed record and take a photo, and please

Precautions:

Please handle gently when unpacking to avoid permanent damage to the stage

caused by bumps;

Please do not use heavy tools or use rough methods to open them;

Please do not discard all packaging materials for return shipments.

7.1 Problem Processing

Common problems are shown in the following table:

Problem Description Possible reasons Solutions

No displacement

or displacement

becomes smaller

The cable is not connected

correctly or is in faulty contact.

Check the cable connection

Excessive load Loaded by product max load

Sensor zero drift Calibrate the sensor

7. Maintenance and processing