User Manual

P73 Piezo Objective Scanner User Manual
6
5. Installation and operation
Safety check should be carried out before installation, such as whether the connection wire
is damaged or broken, whether the drive power supply is grounded, etc.
5.1 Installation and Precautions
Safety check should be carried out before installation, such as whether the connection wire
is damaged or broken, whether the drive power supply is grounded, etc.
Installation of P73 Piezo Objective Scanner is shown as following
1.Screw the objective adapter into P73 Piezo Objective Scanner and tighten it;
2.Screw the objective lens into the objective adapter and tighten it;
3.Connecting the installed objective scanner and the microscope and tighten it;
P73 Piezo Objective Scanner
Mounting notes:
Be careful to handle P73 Piezo Objective Scanner during installation to avoid damage or
scratches and wear of the objective lens.
When connecting the objective lens, the weight of the objective lens shall not exceed the
load capacity of P73 Piezo Objective Scanner.
Objective adapter Objective lens
FIG.2 Installation diagram