User Manual

P72 Piezo Objective Scanner User Manual

Before installation, first check the safety, such as whether the cable is damaged or broken,

and whether the power supply has grounding protection.

Piezo Objective Scanner

Lens

Figure2. P72 Installation diagram

Installation steps of P72, as follows:

1. Screw the corresponding objective lens into the P72 objective scanner and tighten;

2. Tighten the assembled objective lens locator and the microscope connection end;

Note:

During the installation process, please pay attention to handle, so as not to damage the

P72 piezo objective scanner or scratch and wear it.

When connecting P72, it is required that the weight of the objective lens does not

exceed the maximum allowable load of P72.

5. Installation and operation

5.1 Installation and connection