User Manual

6
N61.R5EK Piezo Motor Driven Rotation Stage User Manual
5.2 Load
When installing the load, ensure that the load mass is less than the max load of piezo
motor, and install the load as much as possible at the center of the moving surface.
The correct placement of the load is shown below:
Load applied to the center of piezo motor
Try not to let the load center of gravity exceed piezo motor
For protection, we don't recommend the load is too high. If it is used a higher load, please
reduce the position center of the load gravity.
The error placement method is as follows:
It is forbidden to load the load on one side of the piezo motor, which would cause serious
damage to the product, as shown in the following figure: