Operation Manual

40 Corel VideoStudio X9
3 Specify a folder location for your saved files by clicking the
Capture Folder button
.
4 Click Capture Video to start recording. Click Stop Capture or
press [Esc] to stop capturing.
5 To capture a photo while the DSLR is connected to the computer,
click Take a snapshot.
To capture video from an HDV camcorder
1 Connect your HDV camcorder to your computer’s IEEE-1394 port
using the IEEE-1394 cable.
2 Turn on your camcorder and switch it to Play/Edit mode and make
sure that your HDV camcorder is switched to HDV mode.
Note: F
or Sony HDV camcorders, flip open the LCD screen and
see if HDVout I-Link is on the LCD screen to check if the camera is
set to HDV mode. If you see DVout I-Link, press P-MENU at the
lower right of the screen. In the menu, press MENU >
STANDARD SET > VCR HDV/DV and press HDV.
3 In the Capture workspace, click Capture Video .
To capture DVB-T video
1 In the Capture workspace, click Capture Video .
Note: Bef
ore capturing, ensure that the DVB-T source is
connected via a compatible capture card installed on your
computer.
2 Select Digital TV Source from the Source drop-list.
3 Click Options and select Video Properties. The Video properties
dialog box will appear.
4 In the Input Source tab, select TV from the Input source drop-
list. Click OK.
5 In Channel List, click Start Scan to start scanning for channels.