Operation Manual

188 Corel VideoStudio X9
Using the Sound Mixer
The key to making narrations, background music, and existing audio
of your video clips blend well together is to control the relative volume
of your clips.
To blend the different audio tracks in your project
1 Click the Sound Mixer button on the Toolbar.
Note: If
the Audio Type is set to 3/2 in the Project Properties
Audio Settings, the Surround Sound Mixer is displayed. If the
Audio Type is set to 2/0 Stereo mode, the 2-Channel Mixer is
displayed. You can verify these settings by going to Settings >
Project Properties, clicking Edit in the Project Properties dialog
box, and then clicking the Compression tab in the Edit Profile
Options dialog box.
For information about using the Surround Sound Mixer, see
“Using the Surround Sound Mixer” on page 189.
For information about using the 2-Channel Mixer, see “A dj us t in g
stereo channels” on page 188.
Adjusting stereo channels
In stereo files (two channels), a single waveform represents the left and
right channels.
To use s tereo mode
1 Go to Settings > Project Properties.
2 In the Project Properties dialog box, choose a format from the
Project format drop-list.
3 Click Edit.
4 In the Edit Profile Options dialog box, click the Compression tab.
5 In the Audio format drop-list, choose Dolby Digital Audio.