Operation Manual

180 Corel VideoStudio X9

Adding audio files

You can add audio files to your project in any of the following ways:

• Add audio files to the Library from a local or network drive. (Triple

Scoop r

oyalty-free music is included in the Library).

• Rip audio from CD

• Record a voice-over clip

•Use Auto Music

Not

e: You can also extract audio from a video file.

To add an audio file to the Library

• Click the Import Media Files button to browse for audio files

in your computer.

After you import audio files to the Library, you can add them to

our project by dragging them from the Library to the Timeline.

To add voice-over narration

1 Move the Scrubber to the section of the video where you want to

insert your voice-over.

2 In Timeline view, click the Record/Capture Option button

and select Voice-over. The Adjust Volume

dialog box appears.

Note: The program prompts you when there is an existing voice-

over clip at the current project cue position. Make sure that a clip

is not selected by clicking on an empty area in the Timeline.

3 Speak into the microphone and check if the meter responds

accordingly. You can use the Windows audio mixer

to adjust the

level of the microphone.

4 Click Start and begin speaking into the microphone.

5 Press [Esc] or [Space] to end recording.

6 The best way to record narrations is to do the recording in 10 to

15-second sessions. This makes it easier to remove a badly