User guide

194 Corel VideoStudio Pro User Guide
captured frame. Captured frames automatically appear in the Stop
Motion timeline.
To capture images using a webcam or DV/HDV camcorder
1 If you are using a DV/HDV camcorder, switch it to Play/Edit mode
and make sure that your DV/HDV camcorder is switched to DV/
HDV mode.
2 In Record mode, move your subject between each capture to
show movement in the images.
3 If you are using footage from a DV/HDV camcorder, you can make
screen captures during video playback.
To capture images using a DSLR
1 When a supported DSLR is connected, the Auto Focus button
will be enabled automatically. You can choose to keep this setting
or click the Manual Focus button .
Note: If the DSLR does not support Auto Focus, the Manual Focus
button will be enabled automatically and the Auto Focus button
will be grayed out.
2 You can enable the live view focus display on supported DSLRs by
clicking the Show focus button .
3 Modify any of the following DSLR settings: ISO, White Balance, Ev,
Metering Mode and Image Quality. Corel VideoStudio Pro uses the
DSLR settings for Mode, Aperture and Shutter Speed.
4 You can switch to the Enlarged mode by clicking the Enlarge
button
Using the DSLR Enlarged Mode
Corel VideoStudio Pro mimics the camera viewfinder and gives you
quick access to DSLR features and settings.