Operation Manual

C OREL PDF F USION U SER G UIDE
HOW DO I...? INDEX CONTENTS  72 
PRINT A DOCUMENT INDEX CONTENTS  72 
Set Permissions Options
Select this check box to access the Set Security Permissions Options. See
“Set File Security—Set Security Permission Options” on page 90 for
more information on the options that are available. This is only available
when PDF is selected as the document type.
Set Document Passwords
Select this check box to access the password options that allow you to
enter a password to open the document and to change the security
setting. See “Set Document Passwords” on page 91 for more
information on available options. This is only available when PDF is
selected as the document type.
5 Choose Next > to advance to the next screen in the wizard, and enter the information
as required in the dialog that opens. Repeat this process until you have completed all the
information required by the wizard.
6 In the Save As dialog, choose a location, enter a name and if you wish, change the
document type and setup. Click Save to complete the process when you have made your
choices.
6.7 Print a document
There are several ways to print a document from Corel PDF Fusion.
Before you print you can use the Print Setup options:
• Select File > Print Setup or Ctrl + Shift + P the following options are available:
Print what
Two options are provided: Document and Document and comments .
When
Document is selected the document is printed including any page
markups and annotations (excluding text markups, such as highlights,
strikeouts, underlines and so on). When
Document and comments is
selected the document is printed including any page markups,
annotations and text markups.
Print
Choose all the pages in the range or just the odd or even pages.
Normal Print
This is the default option and offers the fastest printing. See also “Print
to file” on page 73.
Print as Image
If normal printing does not produce the desired results, select this
option. You can set the resolution to 300 or 600 dpi or choose to use
the resolution set on the printer. See also “Print to file” on page 73.
NOTE: When the security of the document allows “low res only” printing, (see “Printing” on page 122 ),
the output resolution is restricted to 150 dpi and the document is printed as an image. A message
stating this is displayed.