Operation Manual
C
OREL
PDF F
USION
U
SER
G
UIDE
THE COREL PDF FUSION WORK AREA INDEX CONTENTS 46
THE NAVIGATION PANE INDEX CONTENTS 46
Extract Pages
Select the Extract Pages icon or Document > Pages > Extract Pages to
extract the selected pages and create a new untitled document
containing those pages.
Rotate Left
Select the Rotate Left icon or Document > Pages > Rotate Left to
rotate the selected pages 90 degrees to the left.
Rotate Right
Select the Rotate Right icon or Document > Pages > Rotate Right to
rotate the selected pages 90 degrees to the right.
Crop Pages
Select the Crop Pages icon or Document > Pages > Crop Pages to
display a Crop page(s) dialog. You specify the size of your crop and the
range of pages to which it is applied in this dialog. A fixed size such as
Letter, A4 can be selected. Alternatively, choose a custom crop size. Your
selected crop is applied to the current page, selected pages or all pages.
In the Size panel the following options are available:
Crop to fixed size lets you select a predefined crop size such as A4, A5,
Letter. The crop is normally measured from the top and left side of the
page. Select Centered to apply the crop centrally.
The thumbnail view of the page on the Crop Pages dialog displays the
areas to be cropped as shaded.
Select Static values to apply a custom crop size. Select your preferred
units from the drop-down menu. Constrain values makes all values the
same. Uncheck this to insert different values for the Top, Bottom, Left
and Right.
The values around the thumbnail image define the size of the crop. You
can either directly enter a number or use the up and down arrows.
The Apply To panel determines the pages to be cropped. Select the
Entire document, Selected Pages or a Range of pages. If you have
selected an area on a page you can select the Current page option. You
enter a Range of pages such as 2-4 to only crop pages numbered 2, 3
and 4.
The Crop drop-down menu allows you to apply the crop to All pages
in range, Odd-numbered pages in range and Even-numbered pages in
range. Therefore, if you have selected the whole document or a range
of pages you can apply the crop to the whole range or just the odd or
even numbered pages.
Select OK to accept your crop values or Cancel to abort them.
NOTE: If cropping values that exceed the page size are entered, the values are ignored and no cropping
is performed.