User Guide

Customizing Brushes 249
2 Move the Wetness slider to the left to create a more uniform brush stroke, or to the
right to have the water flow more in the direction of the wind.
To set paint pickup
1 On the Stroke Designer page of the Brush Creator, click Water.
2 Move the Pickup slider to the right to increase the amount of leaching, or to the
left to reduce it.
To set the dry rate
1 On the Stroke Designer page of the Brush Creator, click Water.
2 Move the Dry Rate slider to the right to reduce the amount of spread, or to the left
to increase it.
To set the evaporation threshold
1 On the Stroke Designer page of the Brush Creator, click Water.
2 Move the Evap Threshold slider to the right to reduce the amount of spread, or to
the left to increase it.
To set the diffusion amount
1 On the Stroke Designer page of the Brush Creator, click Water.
2 Move the Diffuse Amt slider right to create soft edges that feather into the grain,
or to the left to emulate painting on dry paper.
To set the effect of grain on diffusion
1 On the Stroke Designer page of the Brush Creator, click Water.
2 Move the Cap Factor slider to the right to create rougher edges, or to the left to
create smoother, more continuous results.
To set grain soak-in
1 On the Stroke Designer page of the Brush Creator, click Water.
2 Move the Grn Soak-In slider to the right to create rougher surfaces, or to the left to
create smoother, more continuous results.