User Guide

Academic Courseware: Chapter 10
Joyce Ryan
88
Bevel World controls
The Bevel World dialog box includes the following controls in the Bevel
Controls area:
Preview — shows a real-time preview based on the options you set.
Off — prevents Corel Painter from applying the settings to the image.
You can later turn the bevel back on by disabling the check box.
Bevel Interior Edges — lets you add beveling on the interior edges of
the bevel area.
Bevel Width — describes the width of the bevel in relation to the layer
diameter.
Outside Portion — controls the portion of the bevel that appears
outside the layer.
Outside Color — determines the color of the outside portion of the
bevel. This control applies only when Outside Portion is greater than
zero. You can click the Outside Color chip and use the Color dialog box
to set the color.
Rim Slope — specifies the angle of the rim (innermost portion) of the
bevel.
Cliff Portion — describes the horizontal distance between the base and
the rim.