User Guide

Corel Painter 355
Increasing the Pressure slider
increases the effect of pressure on the
width of the tiles. By increasing the
Pressure setting, you can prevent the
creation of narrow tiles in response to
a light stroke. Setting Pressure to
100% creates uniformly wide tiles,
regardless of the pressure.
The Dimensions: Pressure slider controls how
pressure affects tile width. Top 0%,
bottom=100%.
Grout Dimensions
Grout sets the spacing between tiles in
pixels.
The Dimensions: Grout slider controls the
spacing between tiles. Top=0%,
bottom=15%.
Randomness
The Randomness sliders allow you to
control the uniformity of the tile
shapes. Increasing randomness makes
the shapes more erratic—each
different from the last.
For example, if the Length dimension
is 10 pixels, a Length randomness of
25% creates tiles that are randomly
given a length from the range of 7.5 to
12.5 pixels.
Width Randomness
Increasing Width randomness allows
the width to vary by the set
percentage.
The Randomness: Width slider controls the
randomized tile width. Width=92%.
Length Randomness
Increasing Length randomness allows
the length to vary by the set
percentage.
The Randomness: Length slider controls the
randomized tile length. Length=98%.