User Guide

Corel Painter 325
2 On the Layers palette, click the
Dynamic Plug-ins button and
choose Liquid Lens.
3 In the Liquid Lens dialog box,
choose a Liquid Lens tool.
4 Use the sliders and controls to
adjust the distortion effect.
Refer to “Liquid Lens Controls”
on page 323 for more information.
5 Drag in the document window to
create distortion.
If you don’t like the distortions and
you want to start again, click the
Clear button.
6 Click OK to end the Liquid Lens
session.
Tip
•
You can move the Liquid Lens layer
to different regions of the document to
distort other imagery.
To use Rain:
1 Deselect all layers.
2 On the Layers palette, click the
Dynamic Plug-ins button and
choose Liquid Lens.
3 In the Liquid Lens dialog box, set
the sliders to describe the
distortion you want.
4 Click Rain.
Corel Painter scatters distortion
droplets on the layer.
5 Click anywhere to stop the rain.
If Smooth and Size are very high,
the rain might continue for a
moment after you click.
Rain melts the image.
Erasing Distortion
Undo features are not available when
working with the Liquid Lens. Use
the Liquid Lens Eraser tool to clear
distortion from an area.
To erase distortion:
1 In the Liquid Lens dialog box,
choose the Eraser tool.
2 Set the sliders for Size, Spacing,
and Smooth to describe the type of
erasing you want.
Higher Smooth settings create
softer transitions from the erasure
to the remaining distortion.
3 Drag in the document window.
The original underlying imagery
returns.
Eraser
Remove distortion with the Eraser tool.