User Guide

Corel Painter 25
resource you want to use to create
the new library.
2 Choose [Resource Name] Mover.
3 In the Mover dialog box, click
New.
4 In the New Library dialog box,
browse to the location where you
want to save the new library.
5 Type a descriptive name in the File
Name box, and click Save.
The new library’s name appears
on the right side of the Mover
window. The area above the name
is blank because this new library is
empty. To put items in it, you can
move them from other libraries.
Tip
•
It’s a good idea to save libraries in the
same place. This makes them easy to
locate and load when you want them.
Customizing Libraries
The tools for creating libraries and
managing their contents are contained
in the Movers. A Mover is provided on
the selector menu and/or palette
menu for each resource supported by
libraries.
Brush libraries are created and
managed differently. See “Using
Brush Libraries” on page 26 for
procedures.
Moving Items Between
Libraries
Movers copy resources from the
library on one side of the Mover
window to the library on the other
side of the Mover window.
When you open a Mover, the
resources of the current library are
listed on the left. This is the library
you’ll move items “from.” If this is not
what you want, you can open a
different library as the source.
When the source library is open on
the left side and the destination library
is open on the right, you are ready to
move resources.
To open a new library as the
source:
1 Click the selector menu arrow or
palette menu arrow for the
resource you want to use.
2 Choose [Resource Name] Mover.
3 In the Mover dialog box, click
Close to close the current library.
4 Click Open.
5 In the Open Library File dialog
box, choose a library to use as the
source library.
To open a new destination library:
1 Click the selector menu arrow or
palette menu arrow for the
resource you want to use.
2 Choose [Resource Name] Mover.
3 In the Mover dialog box, click
Open.
4 In the Open Library File dialog
box, choose a library file to use as
the destination library.
To move an item from one library
to another:
• In the Mover dialog box, drag the
item from the source library to the
destination library.