User Guide

Corel Painter 179
Wind Force controls the amount of force
exerted on diffusing particles.Top=0%,
bottom=25%.
To set wind force:
1 On the Stroke Designer page of
the Brush Creator, click Water.
2 Move the Wind Force slider to the
right to increase wind force. Move
it to the left to decrease wind force.
Wind Direction
You can specify Wind Direction,
which controls the direction in which
the particles diffuse. This can be used
to simulate tilting a wet Water Color
to introduce dye migration gravity
effects.
Wind Direction controls the direction in which
the particles diffuse. Top=270°, bottom=180°.
To set wind direction:
1 On the Stroke Designer page of
the Brush Creator, click Water.
2 Drag the Wind Direction control
to the desired degree.
Setting Liquid Ink
Controls
Liquid Ink controls work with Liquid
Ink layers. Use the Liquid Ink
controls to specify qualities such as
type, smoothness, and volume of a
brush stroke. You can adjust the
Liquid Ink controls when you have
selected a Liquid Ink brush from the
Brush selector bar.
Ink Type
Liquid Ink is divided into two basic
properties: Ink and Color. The Ink
component provides the form of the
brush stroke, while the Color
component applies color to the Ink
form. The Ink and Color components
can be used together or controlled
separately.
You can select from the following Ink
types:
• Ink Plus Color—applies the
currently selected color to the Ink
form
• Ink Only—applies only the Ink
component
• Color Only—applies only the
Color component
• Soften Ink Plus Color—applies
Color to an Ink form, causing inks
and colors to blend into one
another
• Soften Ink Only—applies only the
Ink component
• Soften Color Only—applies only
the Color component