User Guide

44 Corel Grafigo User Guide
You can also select an ink stroke by opening the Selection tools flyout,
tapping the Lasso selector or Pick selector, and tapping an ink stroke. If you
have multiple ink strokes that overlap each other, tap successively until a
selection box displays around the ink stroke you want selected.
To select an ink stroke that is under an onionskin, you must first hide the
onionskin and then select the ink stroke. For information about hiding
onionskins, see “To display or hide an onionskin” on page 38.
To deselect an ink stroke
• Tap anywhere in the workspace.
Copying and pasting ink strokes
You can cut or copy an ink stroke and paste it into a Corel Grafigo document. Cutting
an ink stroke removes the original from the document; copying an ink stroke leaves the
original in the document.
To copy and paste an ink stroke
1 Select an ink stroke.
2 On the standard toolbar, tap one of the following:
• Cut
• Copy
3Tap Paste on the standard toolbar.
The ink strokes that you paste are added to the workspace as selected ink
strokes.
If you have an active onionskin in the workspace, the ink strokes are pasted
to the onionskin.
Sizing ink strokes
Corel Grafigo lets you change the dimensions of ink strokes. When you size an ink
stroke, you change its dimensions proportionally by preserving its aspect ratio. When
you stretch an ink stroke, you change the ratio between its width and height.