Operation Manual

614 | CorelDRAW X8 User Guide
To print registration marks
1
Click File Print.
2 Click the Prepress tab.
3 In the Registration marks area, enable the Print registration marks check box.
4 Choose a registration mark style from the Style picker.
To print registration marks, ensure that the paper on which you print is 0.5 inches larger on all sides than the page size of the image
that you are printing.
To print color calibration bars and densitometer scales
1
Click File Print.
2 Click the Prepress tab.
3 In the Calibration bars area, enable any of the following check boxes:
• Color calibration bar
• Densitometer scales
If you want to customize the levels of gray in one of the densitometer scale squares, choose a number from the Densities list (lower
values represent lighter squares), and type a new density for that square.
To print page numbers
1
Click File Print.
2 Click the Prepress tab.
3 In the File information area, enable the Print page numbers check box.
If you want to position the page number inside the page, enable the Position within page check box.
To print file information
1
Click File Print.
2 Click the Prepress tab.
3 In the File information area, enable the Print file information check box.
4 Type a job name in the Print file information box.
If you want to position the file information inside the page, enable the Position within page check box.
To position printers’ marks
1
Click File Print preview.
2
Click the Marks placement tool .
3
Click the Auto-position marks rectangle button on the property bar.
4 Type values in the Marks alignment rectangle boxes.