Operation Manual

Using color management | 347
To specify soft-proof settings
1
Click Window  Dockers Color proof settings.
2 Perform any of the following tasks.

To Do the following
Simulate the output of a specific device From the Simulate environment list box, choose the color profile
of the device.
Keep specific color values unchanged Enable the Preserve numbers check box.
Depending on the color profile in the Simulate environment box,
the check box lets you preserve CMYK, RGB, or grayscale color
values.
Change the rendering intent Choose a rendering intent from the Rendering intent list box.
Enable the gamut warning In the Gamut warning area, enable the Out-of-gamut colors
check box.
Change the color of the out-of-gamut overlay In the Gamut warning area, choose a color from the color picker.
Change the transparency of the out-of-gamut overlay In the Gamut warning area, type a value in the Transparency box.
The value should be between 1 and 100.
Save a custom proof preset
Choose the settings that you want, click the Save button , and
then type a name in the Save preset as box.
Out-of-gamut settings are not included in the proof preset.
Choose a proof preset From the Proof preset list box, choose a preset.
Delete a proof preset
Click the Delete button .
The accuracy of the simulation depends on factors such as the quality of your monitor, the color profile of the monitor and the
output device, and the ambient lighting in your work area.
To export a soft proof
1
Click Window  Dockers Color proof settings.
2 In the Color proof settings docker, click the Export soft proof button.
3 Type a filename in the File name box.
4 From the Save as type list box, choose one of the following options:
• JPG - JPEG Bitmaps