Operation Manual

Working with layers | 255
Working with layers
You can work with layers to help you organize and arrange objects in complex illustrations.
This section contains the following topics:
• “Creating layers” (page 255)
• “Changing layer properties” (page 259)
• “Moving and copying layers and objects” (page 262)
Creating layers
All CorelDRAW drawings consist of stacked objects. The vertical order of these objects — the stacking order — contributes to the
appearance of the drawing. An effective way to organize these objects is by using invisible planes called layers.
Drawings can be assembled by placing objects on various levels or layers.
Layering gives you added flexibility when you organize and edit the objects in complex drawings. You can divide a drawing into multiple
layers, each containing a portion of the drawing’s contents. For example, you can use layers to organize an architectural plan for a building.
You can organize the building’s various components (for example, plumbing, electrical, structural) by placing them on separate layers.
Local layers and master layers
All content is placed on a layer. Content that applies to a specific page is placed on a local layer. Content that applies to all pages in a
document can be placed on a global layer called a master layer. Master layers are stored on a virtual page called the Master Page.