Operation Manual

236 | CorelDRAW X8 User Guide
To Do the following
Set vertical margins Type a value in the Vertical margin box, click the Vertical margin
button, and choose one of the following options:
•
Offset vertically — creates a margin of the specified
distance around an object
•
Inset vertically — creates a margin of the specified distance
within an object
•
Offset and inset vertically — creates a margin of the
specified distance around and within an object
Lock the ratio between vertical and horizontal margins
Click the Lock ratio button
View only margin alignment guides
Disable the Object edges button , theObject centers button
, the Intelligent spacing button , and the Intelligent
dimensioning button .
Disable horizontal margins Click the Horizontal margin button, and choose No horizontal
margin .
Disable vertical margins Click the Vertical margin button, and choose No vertical
margin .
Changing the order of objects
You can change the stacking order of objects on a layer or a page by sending objects to the front or back of other objects. You can also
position objects precisely in the stacking order, as well as reverse the stacking order of multiple objects.
The four objects (left) are ordered from top to bottom to create the final image (right).
To move an object in the stacking order
1 Select an object.
2
Click Object Order, and then click one of the following commands:
• To frontof page — moves the selected object in front of all other objects on the page